Manuel d'utilisation / d'entretien du produit 35 du fabricant ZyXEL Communications
Aller à la page of 18
ZyW ALL 35 Internet Security Appliance Quick Start Guide Version 3.62 April 2004.
ZyWALL 35 Internet Security Appliance 1 Introducing the ZyW ALL The ZyWALL 35 is the ideal secure gateway for all data passing between the Intern et and the LAN.
ZyWALL 35 Internet Security Appliance 2 1 Hardware Connections 1.1 Front Panel and Connectors Refer to section 1. 3 on how to setup your ZyWALL. LABEL DESCRIPTION RESET You only need to use this button if you’ ve forgotten the ZyWALL’s pass word. It returns the ZyWALL to the factory defaults (pass w ord is 1234, LAN IP address 192.
ZyWALL 35 Internet Security Appliance 3 LABEL DESCRIPTION EXTENSION CARD SLOT Do not insert or remove a card with the ZyW ALL turned on. Turn off the ZyWALL before inserting or re moving an 802.11b/g-com pliant wireless LAN PCMCIA or CardBus card (to avoid damage) .
ZyWALL 35 Internet Security Appliance 4 3. Slide the 64-pin connector end of th e PCMCIA or CardBus wireless LAN card into the extension card slot if you want to add a 802.
ZyWALL 35 Internet Security Appliance 5 4. If you want to set up a backup WAN c onnection, c onnect the 9-pin fem ale end of your modem or Terminal Adaptor (TA) ca ble to DIAL BACKUP port and the other end to your modem or TA.
ZyWALL 35 Internet Security Appliance 6 1.4 Front Panel LEDs LED COLOR STATUS DESCRIPTION Off The ZyWALL is turned off. Green On The ZyWALL is turned on. PWR Red On The power to the ZyWALL is too lo w. Off The ZyWALL is not ready or has failed. On The ZyWALL is read y and running.
ZyWALL 35 Internet Security Appliance 7 2 Setting Up Your Computer’s IP Address Skip this section if your computer is already set up to accept a dynamic IP address. This is the default for most ne w computers. The ZyWALL is already set up to assign your computer an IP address.
ZyWALL 35 Internet Security Appliance 8 6. Click Ad va n c e d . Remove an y previously installed gateways in the IP Settings tab and click OK to go back to the Internet Protocol TCP/IP Properties screen. 7. Click Obtain DNS server address aut omatically if you do not know your DNS server IP address(es).
ZyWALL 35 Internet Security Appliance 9 3.1 Accessing Your ZyWALL Via Web Configurator 1. Launch your web browser. Enter “192.1 68.1.1” as the web site ad dress. 2. The default pa ssword (“12 34”) is already in the password f ield (in non- readable form at).
ZyWALL 35 Internet Security Appliance 10 4. Click Apply in th e Replace Certificate screen to create a ce rtificate using your ZyWALL’s M AC address that will be specific to this device.
ZyWALL 35 Internet Security Appliance 11 The ZyW ALL automatically logs you out if it is lef t idle for five minutes. If this happens to you, simply log back in. This idle timeout timer is one of the many ZyW ALL features th at you may edit using the w eb configurator .
ZyWALL 35 Internet Security Appliance 12 3.2 Using the Wizard to Configure for Internet Access 1. Click Internet Access in th e HOME screen to help you co nfigure your WAN1 on the ZyWALL to access the Internet. The first wizard screen has three variations depending on what encapsulation type you use.
ZyWALL 35 Internet Security Appliance 13 Internet Connection with PPTP Choose PPTP if your service provider uses a DSL terminator with PPTP login. The ZyWALL must have a static IP address in this case. You’ll also need a login name, associated password, the DSL terminator IP address and possibly a connection ID.
ZyWALL 35 Internet Security Appliance 14 3.3 Test Your Internet Connection Launch your web browser and naviga te to www.zyxel. com . You don’ t need a dial-up progr am such as Dial Up Networking. Re fer to the User’s Gui de for more detailed information on the complete range of ZyWALL features.
ZyWALL 35 Internet Security Appliance 15 Remote Netw ork If the Remote Netw ork field is configured to Single , enter a (static) IP address on the network behind the remote IPSec router.
ZyWALL 35 Internet Security Appliance 16 4. Use the forth wizard screen to c o nfigure I PSec settings an d click Ne xt to continue. Choose Tunnel mode or Transport mode. Choose which protocol to use ( ESP or AH ) for the IKE key exchange. Choose an encryption algorithm or select NULL to set up a tunnel without encryption.
ZyWALL 35 Internet Security Appliance 17 4 Troubleshooting PROBLEM CORRECTIVE ACTION None of the LEDs turn on when you turn on the ZyWALL. Make sure that you have the power adaptor connected to the Z yWALL and plugged in to an appropriate power source.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté ZyXEL Communications 35 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du ZyXEL Communications 35 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation ZyXEL Communications 35, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le ZyXEL Communications 35 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le ZyXEL Communications 35, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du ZyXEL Communications 35.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le ZyXEL Communications 35. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei ZyXEL Communications 35 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.