Manuel d'utilisation / d'entretien du produit CAV6.6-S2 du fabricant Russound
Aller à la page of 120
CA V6.6-S2 System 6-Zone, 6-Source Audio/V ideo Contr oller Amplifier INSTRUCTION MANUAL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER - SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
T ABLE OF CONTENTS 3 USER SECTION Product Intr oduction ....................................................................................................................................................6 Component Guide CAV6.6 Contr oller ..........
T ABLE OF CONTENTS RNET Link In/Out - Multiple Controllers ...................................................................................................................40 RNET Link In/Out - RNET-enabled Components ...............................
USER SECTION Component Guides Explains front panel featur es of the CAV6.6 contr oller , UNO-S2 keypad, optional UNO-S1 keypad and UNO-LRC1 remote contr ol. Operation Step-by-step outline of the system's normal operation, plus a look at adjustable features available thr ough the User Menu.
6 PRODUCT INTRODUCTION Thank you for choosing the Russound ® CAV6.6-S2 System to enhance your home with distributed audio and video. This system’ s state-of-the-art features and components blend seamlessly with your unique lifestyle and prefer ences.
7 USER COMPONENT GUIDE CAV6.6 Contr oller-Fr ont Panel MAIN POWER SWITCH - Supplies power to the CAV6.6 REMOVABLE COVER LENS - Covers the connections on the fr ont of the CAV6.
8 Fr ont A/V AUX Connections The AUX Input is located to the right of the power switch on the front panel. Connect the Left, Right, and Video Input Connectors to the source component using quality RCA signal cables. The AUX IR jack adjacent to the line input accepts an IR Emitter with a 1/8” plug (e.
9 LCD P ANEL - 12-character backlit display shows status of the room, sour ce, volume, and more SOURCE SELECT BUTTON - Scrolls thr ough the sour ces directly connected to the CAV6.6. Pr ess and hold brings up the USER MENU for loudness, bass, treble, etc.
10 USER COMPONENT GUIDE Optional UNO-S1 Keypad-Fr ont Panel LCD P ANEL - 5-character backlit display shows source, volume and r oom status (messages scroll, then display first 5 characters of message) SOURCE SELECT - Scrolls thr ough the available sour ces.
11 USER COMPONENT GUIDE UNO-LRC1 Remote Contr ol LOCAL DEVICE BUTTONS - S e le c t l ocal source to be contr olled by UNO-LRC1. S E T U P - Use for programming UNO-LRC1 u s i n g the built-in library or by learning-in codes. UNO SOURCE BUTTON - Selects UNO Keypad for control by UNO-LRC1.
Main Power and Zone Status The power switch for the CAV6.6 contr oller is "on" in the up position. Any active room is indi- cated on the front of the contr oller by a gr een backlit label, which shows red when the r oom is inactive.
13 Zone On/Off Press and r elease to turn on the UNO System Keypad. This also turns on the corre- sponding CAV6.6’ s room, and any pr esets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, e t c .
14 The User Menu allows the user to adjust the audio properties and contr ol functions of a par- ticular room. The following keys are used to navigate and make changes while using the User Menu: T o enter the User Menu, press and hold dur- ing normal operation.
15 USER OPERA TION Optional UNO-S1 Keypad Button Functions The optional UNO-S1 keypad operates in a similar manner as the UNO-S2 keypad. Zone On/Off Press and r elease to turn on the UNO System Keypad.
16 USER OPERA TION Optional UNO-S1 User Menu - Setting Prefer ences The UNO-S1 User Menu allows the user to adjust the audio properties and contr ol func- tions of a particular room. T o enter or exit the User Menu, press and hold during normal operation.
17 INST ALLER SECTION Getting Started Includes an installation overview , including tools needed and wiring instructions. Component Guides Reviews front and back panel featur es of the CAV6.6 contr oller and the UNO-S2 keypad. Keypad Installation Explains UNO-S2 keypad installation and wiring.
18 INST ALLER GETTING ST ARTED Unpacking the System Components • Keep the original carton and packing materials for future shipment or storage. • Check for any visible signs of damage. If you encounter any concealed damage, con- sult your Russound dealer before pr oceeding to install the unit.
19 INST ALLER WIRING INSTRUCTIONS RJ-45 Connections The CA T-5 T568A wiring stan- dard shown on the right is used for the RJ-45 terminations. Keypad Wiring For the UNO keypad, the following connections are used to terminate the CA T-5 wir e to the 110 punchdown on the keypad: CA T -5 WIRE COLOR TYPE Br own .
20 INST ALLER COMPONENT GUIDE CAV6.6 Contr oller-Fr ont Panel 1 7 2 5 8 3 6 9 10 11 4.
21 INST ALLER COMPONENT GUIDE CA V6.6 Controller -Fr ont Panel PROGRAM SELECTOR COVER - Protects the Pr ogram Selector Switch KEYP AD PROGRAMMING PORT - Accepts an RJ-45 terminated UNO keypad to program certain featur es of the CAV6.
22 17 16 14 12 13 15 19 18 21 20 ZONE 12VDC TRIGGER OUT - 12VDC 50ma is available whenever the corresponding zone is turned on UNO KEYP AD PORTS - One UNO Keypad Por t for each of the six CAV6.6 Zones 24VDC 2.5A INPUT - Provides power to the A-BUS READY SUB-ZONES when used with a 24VDC 2.
23 SPEAKER OUTPUTS - Connect 8 Ohm speakers for each zone by using detachable color-coded modular snap connectors AUDIO/VIDEO INPUTS - Six sets of Audio/Video Line Level input connections for CAV6.
24 INST ALLER COMPONENT GUIDE UNO-S2 Keypad-Fr ont Panel SETUP BUTTON - Activates Installer Setup Mode for the UNO-S2 keypad OS UPDA TE PORT - Por t used for UNO keypad OS software updates 1 2 1 2 DA .
25 EXTERNAL IR RECEIVER IN CONNECTOR - Connection for an external IR Receiver . OS UPDA TE JUMPER - Selects “Run” or “OS Update” mode. RESET BUTTON - Reset whenever changing from RUN to OS update 110 PUNCHDOWN CONNECTOR - T ermination for CA T-5 connection between the UNO-S2 Keypad and the CAV6.
26 INST ALLER UNO-S2 KEYP AD-INST ALLA TION Keypad Location The best infrared r emote performance is achieved with the keypad away from any dir ect sunlight, plasma TV , and low voltage lighting controls. Also consider convenience when choosing a location.
27 CA T -5 Connection The UNO-S2 Keypad uses a 110-punchdown terminal to provide a simple installation and strong connection for CA T-5 cable’ s eight con- ductors. Punchdown terminals requir e the use of a punchdown tool which has been provided with the keypad kit.
28 The UNO-S2 keypad has an External IR Receiver In terminal for connecting an external IR receiver such as the Russound SaphIR 858, 862 Eye, or 860 Phantom. Use 2 twisted pair wire with one pair connecting GND (GROUND) and IR (SIG- NAL) and the other pair connecting ST (ST A TUS) and V+ (+12VDC).
29 The UNO System Keypad Ports are located on the back of the CAV6.6 in the top left corner . Connections made at the UNO Keypad Ports are made using CA T-5 T568A RJ-45 wir e configura- tion.
30 The CAV6.6 supports up to six audio/video sources. The Sour ce Inputs are located at the back panel. Connect each source output using quality RCA signal cables. Connect the Video, and the Left and Right Audio outputs from each source to the corr esponding inputs on the CAV6.
31 The CAV6.6 has six buffer ed, fixed-level audio/video source loop outputs. This sour ce loop configuration allows the CAV6.6 to pass sour ce signals to another component, such as a home theater receiver or to another CA V6.6 for sharing sources in a multiple contr oller system.
32 The speakers are connected to the CA V6.6 using modular snap speaker connectors. Each of these color coded connectors is designated for the speaker set of a particular amplified zone. T o avoid confusion, connect one zone speaker set at a time starting with Zone 1, tak- ing care to keep zone and speaker wir e identi- ties straight.
33 The Accessory IR jack on the rear of the CA V6.6 allows control of any sour ce equipment without that source being selected on the keypad. The connection for the ACC IR jack is made using an IR emitter with the 1/8’’ plug.
34 The CAV6.6 has six Zone Audio/Video outputs. The V ariable Audio outputs can be used if addi- tional amplification is desired (e.g., Russound DP A-1.2 two-channel amplifier). The Zone Audio/Video Outputs are located slightly to the left of center on the rear of the CA V6.
35 A-BUS products can easily expand the CA V6.6 audio system by adding A-BUS Ready Sub-zones to the first four CAV6.6 zones. The A-BUS Ready Sub-zones are located on the back of the CAV6.6 at the bottom left corner . The A-BUS Ready Sub-zones are power ed by a 24VDC power supply such as the A-PS.
36 12VDC Home Theater T rigger In This 12VDC T rigger input is used to control Power Management of the audio/video sources possibly being shared with a home theater sys- tem. When the source equipment is off and 12VDC is provided to the trigger , the sources will be turned on until it is removed.
37 Zone 12VDC T rigger Outputs Zone 12VDC T riggers are located dir ectly under the UNO Keypad Ports. The 12VDC T rigger is engaged when the corresponding zone is turned on and disengaged when the zone is turned off. The trigger can be used to engage any 12VDC trigger device or component such as the Russound DP A-1.
38 12VDC Page T rigger In When 12VDC is applied to the Page T rigger In, the system will page audio that is connected to the Page Audio Input and interrupt the video out- puts with the page video signal. The Page T rigger In is located in the Page connection area of the CAV6.
39 INST ALLER MAKING CONNECTIONS 12VDC T rigger In/Out.
40 40 The RNET Link In and Link Out is used to con- nect two or more (up to 6) CA V6.6 or CAM6.6 controllers. The connection is made using a CA T-5 patch cable fr om the Link Out of the mas- ter controller and into the Link In of the next controller .
41 INST ALLER MAKING CONNECTIONS RNET Link In and Link Out - RNET -enabled Components The RNET Link In and Link Out is also used to connect the CAV6.6 to other Russound RNET -enabled products. The connection is made using a CA T-5 patch cable fr om the Link Out of the controller and into the Link In of the RNET - enabled component.
42 42 The CAV6.6 supports RS-232 communication with various third-party automation systems through the RS-232 ports. These ports are also used for firmware updates, and for contr oller programming thr ough the PC Power T ool soft- ware pr ogram. The two RS-232 com ports are located on the front and the back of the CA V6.
43 The CAV6.6 can be pr ogrammed via keypad connection using CA T-5 and the T568A RJ-45 wire configuration. An UNO-S2 Keypad can be attached to the controller at the Pr ogramming Center Keypad Port Connection.
44 INST ALLER FIRMWARE UPDA TES UNO-S2 Keypad Diagnostics Menu The Diagnostics Menu allows the installer to run a diagnostic check on the keypad and to verify the firmware version. The Diagnostics Menu also contains the update firmware pr ocedur e for updating the UNO-S2’ s firmware.
45 INST ALLER FIRMWARE UPDA TES UNO-S2 Keypad Firmware Update Pr ocedure Note: When a firmware update is r eleased, it is available online at the Document Center on www .russound.com , in T echnical Documents under Multi-zone products. The firmwar e update procedur e may be modified, so always check for the latest version.
46 INST ALLER FIRMWARE UPDA TES CAV6.6 Firmwar e Update Pr ocedure Note: When a firmware update is r eleased, it is available online at the Document Center on www .russound.com , in T echnical Documents under Multi-zone products. The firmwar e update procedur e may be modified, so always check for the latest version.
47 The PC Power T ool is a custom software pr o- gram that provides an easy way to pr ogram the CAV6.6 using a PC to upload the pr ogram set- tings to the controller via a serial cable. System requir ements for PC Power T ool: 1. PC computer running Windows 98, ME, 2000, XP 2.
48 Before pr oceeding to the system pr ogramming section, it’s important to conduct an initial test to determine that the hardwar e components ar e working properly . 1. Connect the speaker wires fr om Zone #1 to the CAV6.6 Zone #1 speaker output connectors.
49 This manual includes items that are designed to assist in the pr ogramming pr ocess. Sample Configurations (Pages 84-95) A series of sample configurations are pr ovided to showcase a variety of system designs and compo- nent options.
50 2. Number of Sources (# of Sour ces/SOURCE SETUP) (Page 61) This procedur e sets the number of sour ces used in the system. This prevents the user fr om selecting a source input that is not used.
51 INST ALLER PROGRAMMING Source Information Form.
52 INST ALLER PROGRAMMING Zone Information Form.
53 INST ALLER PROGRAMMING Macr o Editor Form.
54 INST ALLER INST ALLA TION MENU There ar e thr ee item types in the installation menu: Menu Item – Acts as a folder that holds procedur es and/or featur e parameters. Pr ocedure – A sequence of feature parameters to perform a guided operation, such as configuring an UNO key .
55 INST ALLER INST ALLA TION MENU The following items make up the Installation Menu: SOURCE SETUP (SrcSu) ZONE SETUP (ZonSu) CTRLR SETUP (CtlSu) PO WE R MGT ( Pw Mgt ) LEARN IR (LrnIR) MACRO EDITOR (MacEd) SYSTEM INFO (SInfo) SOURCE SETUP (Sr cSu) Source Setup allows the system’ s sources to be configur ed.
56 INST ALLER INST ALLA TION MENU Basic Setup (cont’d.) ii. TEMPLA TE TYP – Select the template type to define what type of source compo- (TT ype) nent is being used. (This will tell the CAV 6.6 how to configur e the key commands and text for the source component if it is a learned source.
57 INST ALLER INST ALLA TION MENU Key Config (cont’d.) 2. SOURCE NUM – Select the source the key will be configur ed for . (Src #) 3. SELECT A KEY – Using or , select the keypad key to be configured. (SelKy) 4. KEY TYPE – Either “Key Press,” “Key Hold” or “Both” will activate the command.
58 INST ALLER INST ALLA TION MENU SOURCE NAMES (SrcNm) This procedur e allows the installer to customize the sour ce names for the sources attached to the CAV6.6. See Source Setup Menu on Page 55 and Sour ce Names/V ol T rim - Flow Chart on page 69 1.
59 INST ALLER INST ALLA TION MENU Numeric IR (cont’d) a. Selected: Learned IR Choose Learned IR if the pre-pr ogrammed IR code library does (LrnIR) not support the source component. i. LEARNED SRC – Select the learned sour ce bank to be assigned to the source (LnSrc) component.
60 INST ALLER INST ALLA TION MENU Numeric IR (cont’d) i. MACRO - Macr o loads a series of commands which are pr ocessed when (Macro) activated. ii. MACRO ID – Enter the macro ID number . Menu advances to SAVE CHANGES (MacID) (step 13) e. All Other Selections: Procedur e advances to DEVICE CODE (step 11) 11.
61 INST ALLER INST ALLA TION MENU Source Select Command (cont’d) e. All Other Selections: Procedur e advances to DEVICE CODE (step 3) 3. DEVICE CODE – Source component code for IR contr ol. (DevCd) 4. KEY FUNCTION – Select a function (Play , Enter , etc.
62 5. P AGE ENABLE - This feature is either disabled or enabled. It allows the option of (PagEn) receiving or blocking a page in a zone. If disabled, the page will not be sent to the zone.
63 one minute after that. This timeout is postponed for as long as the home theater trigger input has 12VDC present. See Installation Menu on Page 55 and Power Management - Flow Chart on page 74 1. SOURCE NUM – Select the source number this feature will be configur ed for .
64 7. POWER OFF CMD – T e l ls the controller to turn off the selected sour ce equipment (by (OfCmd) SOURCE NUMBER) when the last of the UNO System Keypads is turned off. If “no,” procedur e advances to SAVE CHANGES (step 11) 8. COMMAND TYPE – Select the type of sour ce command (e.
65 1. LEARNED SRC – Select the source whose commands will be learned into the con- (LnSrc) tr oller . 2. KEY FUNCTION – Select the function to be learned or deleted. (KeyFn) 3. LEARN/DELETE – Select Learn IR Now or Delete IR. If Learn IR Now , a “USE (Ln/Dl) REMOTE” prompt appears.
INST ALLER INST ALLA TION MENU Macr o Editor (cont’d) 66 i. LEARNED SRC – Select the learned sour ce bank to be assigned to the source (LnSrc) component. Pr ocedure advances to KEY FUNCTION (step 6) b. Selected: Unassigned Selected command and subsequent commands are clear ed.
67 INST ALLER SETUP MENU FLOW CHARTS Source Setup: Basic Setup.
68 INST ALLER SETUP MENU FLOW CHARTS Source Setup: Key Configuration.
69 INST ALLER SETUP MENU FLOW CHARTS Source Setup: Sour ce Names/V olume T rim.
70 INST ALLER SETUP MENU FLOW CHARTS Source Setup: Numeric IR.
71 INST ALLER SETUP MENU FLOW CHARTS Source Setup: Sour ce Select Command/# of Sour ces.
72 INST ALLER SETUP MENU FLOW CHARTS Zone Setup.
73 INST ALLER SETUP MENU FLOW CHARTS Contr oller Setup.
74 INST ALLER SETUP MENU FLOW CHARTS Power Management.
75 INST ALLER SETUP MENU FLOW CHARTS Learn IR.
76 INST ALLER SETUP MENU FLOW CHARTS Macr o Editor.
77 INST ALLER SETUP MENU FLOW CHARTS System Info.
78 REFERENCE SECTION IR Device Codes List of controller’ s IR device code library for source Device Code entries. Sour ce Names List List of Source Names available for assignment. Sample Configurations Diagrams of various configurations using the CAV6.
79 IR CODES Device Codes for TVs: AOC 0030, 0019 Admiral 0093, 0463 Advent 0761 Aiko 0092 Aiwa 0701 Akai 0030 Alaron 0179 America Action 0180 Ampro 0751 Anam 0180 Apex Digital 0748, 0765, 0767 Audiovo.
80 IR CODES Philips 1818, 1061 Pioneer 1010 Princeton 0113, 0295 Samsung 1190, 1204 Sensory Science 1126 Sharp 1010 Sony 0850 Device Codes for SA T/DSS: AlphaStar 0772 Chaparral 0216 Crossdigital 1109 Echostar 0775, 1005 Expressvu 0775 GE 0566 GOI 0775 General Instrument 0869 HTS 0775 Hitachi 0819 Hughes Net.
81 IR CODES Realistic 0203 Sony 0201, 0193 T echnics 0204 Device Codes f o r DVD P l a y e r s : Aiwa 0641 Apex Digital 0672, 0755, 0794, 0795, 0796, 0797, 0830 Blue Parade 0571 Broksonic 0695 Daewoo .
82 SOURCE NAMES UNO-S1 UNO-S2 Aux AUX Aux 1 AUX 1 Aux 2 AUX 2 Blues Blues Cable Cable Cbl 1 Cable 1 Cbl 2 Cable 2 Cbl 3 Cable 3 CDCh CD Changer CDCh1 CD Changer 1 CDCh2 CD Changer 2 CDCh3 CD Changer 3.
83 SOURCE NAMES UNO-S1 UNO-S2 RepTV ReplayTV Rock Rock Sat Satellite Sat 1 Satellite 1 Sat 2 Satellite 2 Sat 3 Satellite 3 SatRd Sat Radio Src 1 Source 1 Src 2 Source 2 Src 3 Source 3 Src 4 Source 4 S.
84 The configuration shows how the CAV6.6 distrib- utes audio/video throughout the house using six UNO System Keypads and six audio/video source components. Source Components The configuration allows for any zone to select any one of the six source inputs.
85 SAMPLE SYSTEM CONFIGURA TION 1 Six Zones and Six Sources.
86 This configuration uses an additional CAV6.6 to add six additional amplified zones, controlled through UNO-S2 Keypads. The sour ce compo- nents are connected to both CA V6.6s with RCA cables using the source in/loop out to inter con- nect the audio/video signals.
87 SAMPLE SYSTEM CONFIGURA TION 2 Integrate Multiple CA V6.6’ s.
88 This configuration uses a SA-ZX3 Keypad Splitter hub to connect up to three UNO-S2 key- pads to one CAV6.6 UNO keypad port. For clean installations, use RJ-45 CA T-5 patch cables with the T568A configuration. T o connect from the SA-ZX3 to an RJ-45 wall plate (optional), use the patch cables to wire for the wall plate to the keypad.
89 SAMPLE SYSTEM CONFIGURA TION 3 Zone Keypad Expansion.
90 Adding A-BUS allows sub-zoning of the audio dis- tribution of the CAV6.6 system. This configura- tion demonstrates sub-zoning of the first zone through the use of an A-BUS expansion hub. Only the first four (1-4) CAV6.6 zones can be expanded using the same numbered (1-4) A-BUS Ready Sub-Zone ports.
91 SAMPLE SYSTEM CONFIGURA TION 4 A-BUS Ready Sub-Zone Addition.
92 Additional amplification can be added to the CAV6.6 when more power or mor e speakers ar e desired. This configuration adds an external amplifier to the CAV6.6. The Zone Audio (T o Amp) Outputs are variably contr olled by the associated UNO- S2 keypad and can be connected to an external amplifier .
93 SAMPLE SYSTEM CONFIGURA TION 5 Additional Amplification.
94 Home Theater systems can share sour ces with a CAV6.6 Contr oller to provide additional listen- ing and viewing options. In this configuration, the Home Theater Receiver provides a 12VDC signal to the CAV6.
95 SAMPLE SYSTEM CONFIGURA TION 6 Home Theater.
96 INST ALLER KEY CODES TV (HDTV) KEY FUNCTION UNO-S1 TV (HDTV) 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olU.
97 KEY FUNCTION UNO-S1 TV (HDTV) Off Off Of f, Power On/Off 11 11 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only .
98 INST ALLER KEY CODES CABLE KEY FUNCTION UNO-S1 CABLE 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olum.
99 KEY FUNCTION UNO-S1 CABLE PIP Chan Up PIPCU Learned Only PIP Chan Dn PIPCD Learned Only Input 1 In 1 A,VID1,Video,TVp1 Input 2 In 2 B,VID2,TVp2 Input 3 In 3 C,VID3,TVp3 Input 4 In 4 VID4,TVp4 Input.
100 INST ALLER KEY CODES VIDEO ACC KEY FUNCTION UNO-S1 VIDEO ACC 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V ol.
101 KEY FUNCTION UNO-S1 VIDEO ACC Off Off Off, Power On/Off 1 1 1 1 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Onl.
102 INST ALLER KEY CODES SA T/DSS KEY FUNCTION UNO-S1 SA T/DSS 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp.
103 KEY FUNCTION UNO-S1 SA T/DSS PIP Chan Up PIPCU Learned Only PIP Chan Dn PIPCD Learned Only Input 1 In 1 VID1,Video,TVp1 Input 2 In 2 VID2,TVp2 Input 3 In 3 VID3,TVp3 Input 4 In 4 VID4,TVp4 Input 5.
104 INST ALLER KEY CODES VCR KEY FUNCTION UNO-S1 VCR 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume U.
105 KEY FUNCTION UNO-S1 VCR Off Off Of f, Power On/Off 11 11 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim D.
106 INST ALLER KEY CODES LASER DISC KEY FUNCTION UNO-S1 LASER DISC 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 5Digit 5 6 6 6Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up .
107 KEY FUNCTION UNO-S1 LASER DISC Off Off Off, Power On/Off 1 1 1 1 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned On.
108 INST ALLER KEY CODES DVD KEY FUNCTION UNO-S1 DVD 1 1 Digit 1, T raack 1 2 2 Digit 2, T rack 2 3 3 Digit 3, T rack 3 4 4 Digit 4, T rack 4 5 5 Digit 5, T rack 5 6 6 Digit 6, T rack 6 7 7 Digit 7, T.
109 KEY FUNCTION UNO-S1 DVD Off Off Off, Power On/Off 1 1 1 1 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim .
110 INST ALLER KEY CODES RECEIVER KEY FUNCTION UNO-S1 RECEIVER 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp.
111 KEY FUNCTION UNO-S1 RECEIVER Off Off Of f, Power On/Off 11 11 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only .
112 INST ALLER KEY CODES AMP/MISC AUDIO KEY FUNCTION UNO-S1 AMP/MISC AUDIO 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olu.
113 KEY FUNCTION UNO-S1 AMP/MISC AUDIO Off Off Off, Power On/Of f 1 1 1 1 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learn.
114 INST ALLER KEY CODES CD KEY FUNCTION UNO-S1 CD 11 Digit 1, T rack 1,Dsc1 22 Digit 2, T rack 2,Dsc2 33 Digit 3, T rack 3,Dsc3 44 Digit 4, T rack 4,Dsc4 55 Digit 5, T rack 5,Dsc5 66 Digit 6, T rack .
115 KEY FUNCTION UNO-S1 CD Off Off Of f, Power On/Off 1 1 1 1 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim .
116 INST ALLER KEY CODES HOME CONTROL KEY FUNCTION UNO-S1 HOME CONTROL 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume U.
117 KEY FUNCTION UNO-S1 HOME CONTROL Off Off Off, Power On/Off 1 1 1 1 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned .
118 TECHNICAL SPECIFICA TION CAV6.6 Contr oller/Amplifier Dimensions: 17"W x 12"D x 3.5"H (43 x 30.5 x 9 cm) Weight: 18 lbs. (8.1 kg) Power Supply: 110 or 240 VAC Fuse Rating: 110V input; F3A H 250V US and Canada 240V input; F1.25A H 250V Europe Frequency Response: 20Hz-20kHz +/- 0.
119 WARRANTY & REP AIR The Russound CAV6.6 is fully guaranteed against all defects in materials and workmanship for two (2) years from the date of pur chase. During this period, Russound will r eplace any defective par ts and correct any defect in workmanship without char ge for either par ts or labor .
Russound 5 Forbes Road, Newmarket, NH 03857 tel 603.659.5170 • fax 603.659.5388 e-mail: tech@russound.com www .russound.com Copyright © 2004 Russound ® .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Russound CAV6.6-S2 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Russound CAV6.6-S2 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Russound CAV6.6-S2, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Russound CAV6.6-S2 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Russound CAV6.6-S2, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Russound CAV6.6-S2.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Russound CAV6.6-S2. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Russound CAV6.6-S2 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
