Manuel d'utilisation / d'entretien du produit H2080MW8 du fabricant Magnavox
Aller à la page of 116
Owner's Manual H2080MW8 HDD & DVD P LAYER / R ECORDER WITH D IGITAL T UNER T HANK YOU FOR CHOOSING M AGNAVOX . N EED HELP FAST ? R EAD YOUR Q UICK G UIDE AND / OR O WNER ' S M ANUAL FIRST FOR QUICK TIPS THAT MAKE USING YOUR M AGNAVOX PRODUCT MORE ENJOYABLE .
2E N 2E N PRECA UTIONS This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
3 EN 3 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español PRECA UTIONS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated.
4E N 4E N PRECA UTIONS Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.
5 EN 5 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español Manufactured under license from Dolby Laboratories.
6E N 6E N C ONTENT S Introduction PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Symbols Used in this Owner's Manual . .
7 EN 7 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español C ONTENTS Playback INFORMATION ON PLAYBACK . . . . .
8E N 8E N FEA TURES This unit not only plays back the contents on internal HDD, DVD, or CD, but also offers features for you to record on HDD or DVD and edit them after that. The following features are offered with this unit. This unit allows you to record on the HDD, a DVD+RW/- RW (rewritable) and a DVD+R/-R (one-time write).
9 EN 9 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español .
10 EN 10 EN FUNC TIONAL O VERVIEW ( * ) The unit can also be turned on by pressing these buttons. 1. STANDBY-ON y y button Press to turn the unit on and off. 2. Disc tray Place a disc when opening the disc tray. 3. OPEN/CLOSE A button* Press to open or close the disc tray.
11 EN 11 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español 1. ANTENNA IN jack Use to connect an antenna. 2. VIDEO IN jack (E1) Use to connect external device with a RCA video cable.
12 EN 12 EN FUNC TIONAL O VERVIEW Using a Remote Control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
13 EN 13 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español FUNC TIONAL O VERVIEW ( * ) The unit can also be turned on by pressing these buttons.
14 EN 14 EN Appears when data is being written on a disc. Appears when a disc is loaded on the disc tray. Appears when the PBC function is activated. (Video CD playback only. Refer to page 59.) Appears when the disc tray is closing. Appears when the disc tray is opening.
15 EN 15 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español ANTENNA CABLE C ONNEC TION This section describes how to connect your unit to an antenna, cable box, etc. * Once connections are completed, turn on the TV and begin initial setting.
16 EN 16 EN RF MODULA T OR C ONNEC TION If your TV has antenna in jack only , it is still possible to connect this unit to your TV by using a commercially available stereo audio/video RF modulator. In this case, follow the instructions below. 1) Disconnect the power cords of the devices from the AC outlet.
17 EN 17 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español CONNECTION TO A CABLE / SATELLITE BOX 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below.
18 EN 18 EN COMPONENT VIDEO OUT Y PB / CB PR / CR COMPONENT VIDEO IN Y P B /C B P R /C R (Green) (Blue) (Red) (Green) (Blue) (Red) IN IN OUT VIDEO IN AUDIO IN ( E1 ) S-VIDEO AUDIO OUT L R VIDEO OUT Y ANTENNA R L A UDIO IN L R L AUDIO OUT R VIDEO OUT Make one of the following connections, depending on the capabilities of your existing device.
19 EN 19 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup Others Español IN IN OUT VIDEO IN AUDIO IN ( E1 ) S-VIDEO S-VIDEO AUDIO OUT COMPONENT VIDEO OUT OUT L R VIDE.
20 EN 20 EN BEFORE Y OU ST ART After you have completed all the connections, you must find the viewing channel (external input channel) on your TV. 1 After you have made all the necessary connections, press [STANDBY-ON y y ] to turn on the unit. 2 Turn on your TV.
21 EN 21 EN Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español CH 10 1/ 5 1/ 5 DVD Video 0:01:00 / 1:23:45 DVD SP 1h53m 6 5 7 1 2 4 3 51 2 * This is an example screen only for explanation.
22 EN 22 EN BEFORE Y OU ST ART Main Menu Press [SETUP] to display the main menu. Then use [ K / L ] to select a menu and press [OK ] to display the menu. T hese menus provide entries to all main functions of the unit. Setup Timer Programming Title List Disc Edit HDD Menu General Setting Dubbing CD Playback Mode 1 1 2 2 3 3 4 4 4 5 4 6 4 7 1.
23 EN 23 EN Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español 1. Edit Disc Name: Allows you to rename the disc.
24 EN 24 EN Because this unit is a combination of HDD and DVD recorder, you must first select which component (output mode) you wish to operate. ST ANDBY-ON DTV/TV ABC DEF .@/: JKL MNO GHI TUV WXYZ SP ACE CLEAR SETUP DISC MENU RETURN TITLE CHANNEL TIMER AUDIO HDD DVD REPEA T REC MODE D.
25 EN 25 EN Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español INITIAL SET TING You need to follow these steps when you turn on this unit for the first time.
26 EN 26 EN CHANNEL SET TING If you have changed antenna connection, we recommend that you program available channels in your area with the following procedures. 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. “General Setting” menu will appear.
27 EN 27 EN Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español 1 Press [DTV/TV] to select the mode (DTV or TV) to/from which you want to add/delete channels.
28 EN 28 EN ANALOG 5 Select the channel number to add or delete. • Use [CHANNEL / ] to cycle through only the memorized channels. • Use [ { / B ] to cycle through all the channels including the ones not memorized. • Use [the Number buttons] to select a channel directly.
29 EN 29 EN Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español SET TING THE CL OCK Set the clock before you try the timer programming.
30 EN 30 EN SET TING THE CL OCK 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. “General Setting” menu will appear. 2 Use [ K / L ] to select “Clock”, then press [OK]. “Clock” menu will appear. 3 Use [ K / L ] to select “Daylight Saving Time”, then press [OK].
31 EN 31 EN Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español TUNER SET TINGS Switching Analog Mode / Digital Mode You can easily switch the analog TV (NTSC) and digital TV (ATSC) with the remote control.
32 EN 32 EN 1 Press [AUDIO] to cycle through available audio languages. English 1/2 • When you press [AUDIO] , selected language will be displayed on the TV screen. • Every time you press [AUDIO] , the language will be switched. e.g.) English 1/3 ➔ Spanish 2/3 ➔ Other 3/3 • Available languages differ depending on the broadcast.
33 EN 33 EN Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK].
34 EN 34 EN 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. “General Setting” menu will appear. 2 Use [ K / L ] to select “Display”, then press [OK]. 3 Use [ K / L ] to select “CC Style”, then press [OK].
35 EN 35 EN Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español Connections Basic Setup Recording Playback Editing Introduction Function Setup Others Español 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK].
36 EN 36 EN 6 Use [ K / L ] to select the item and switch the setting for each item you want to set, then press [OK]. • When “User Setting” is set to “ON”, you can set the following items. CC style set by “User Setting” will be displayed.
37 EN 37 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español INFORMA TION ON REC ORDING Logo Attributes 8cm/12cm, single-sided, single layer disc Approx. max. r ecording time (SLP mode): 360 minutes (4.7GB) (for 12cm) 108 minutes (1.
38 EN 38 EN You can select a recording mode among 6 options, and the recording time will depend on the recording mode you select as follows. Recording mode Recording time Video/sound quality 60 min 12.
39 EN 39 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español BEFORE REC ORDING Use this feature to make the unfinalized +VR mode discs recorded on other unit recordable on this unit.
40 EN 40 EN BASIC RECORDING & ONE-TOUCH TIMER RECORDING If you are recording to the HDD, press [HDD] first, then proceed to step 2. If you are recording to a disc, press [DVD] first. 1 Insert a recordable disc (refer to page 24 on how to insert a disc).
41 EN 41 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español BASIC REC ORDING & ONE- T OUCH TIMER REC ORDING 5 Press [STOP C ] to stop recording. As for DVD recording, the title list will appear automatically after writing to a disc complete.
42 EN 42 EN TIMER REC ORDING 1 Press [TIMER]. 2 Use [ K / L ] to select “New Program”, then press [OK]. Timer Programming 1/1 MON FEB/19 11:30AM Date Start End CH New Program 3 Use [ K / L ] to enter the date, then press [ B ]. Date FEB/20 REC T o Mode HDD SP SP 2h00m Start - - : - - End - - : - - CH DTV125.
43 EN 43 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español 4 Use [ K / L / s / B ] or [the Number buttons] to enter the start and end time, then press [ B ]. Date FEB/20 REC T o Mode HDD SP SP 2h00m Start End - - : - - CH DTV125.
44 EN 44 EN How to select a channel number for the timer recording Analog TV For channel number 2-6 press, press [ B ] or [ • ] to decide the channels. For other channels (7-69), the channel will be decided as soon as you enter the channel number. Analog CATV For channel number 1-12 press, press [ B ] or [ • ] to decide the channels.
45 EN 45 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español TIMER REC ORDING Hints for Timer Recording When the starting time is the same: A program set previously (PROG. A ) has priorit y . PROG. A PROG.
46 EN 46 EN Note • If you press [TIME SHIFT] when the unit is in DVD mode, the output mode will automatically be switched to HDD, and the unit will start the time shift playback of the title being recorded. • You can also use the special playback functions such as [ E ] , [ D ] etc.
47 EN 47 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español You can overwrite the existing title from the beginning. 1) Press [STANDBY-ON y y ]. Make sure that the TV input is set on the unit. 2) Load the disc that includes a title to be overwritten.
48 EN 48 EN SPECIAL REC ORDING When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion please check if there is no important title after the overwriting point.
49 EN 49 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español “High” This unit is compatible with the high speed dubbing from HDD to DVD. High speed dubbing offers you the dubbing speed of 12 times the SLP mode dubbing.
50 EN 50 EN IN IN OUT VIDEO IN AUDIO IN ( E1 ) S-VIDEO S-VIDEO AUDIO OUT COMPONENT VIDEO OUT OUT L R VIDEO OUT Y PB / CB PR / CR ANTENNA R L DIGITAL AUDIO OUTPUT PCM / BITSTREAM COAXIAL VIDEO IN AUD I.
51 EN 51 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español DUBBING Recording from an External Device If you are recording to the HDD, press [HDD] first, then proceed to step 2. If you are recording to a disc, press [DVD] first.
52 EN 52 EN Selected Title Dubbing Preparing for dubbing (HDD to DVD): • Insert a recordable DVD. Preparing for dubbing (DVD to HDD): • Insert a disc to be dubbed. 1 Press [SETUP] in stop mode. 2 Use [ K / L ] to select “Dubbing”, then press [OK].
53 EN 53 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español 5 Use [ K / L / s / B ] to select a desired title, then press [OK]. e.g.) HDD Title List 1 / 6 ABCDE 12:00AM (10:00:00) JAN/ 1/07 CH10 SP 1 4 5 6 2 3 The title is now registered in the dubbing list.
54 EN 54 EN One Title Dubbing (HDD to DVD only) Preparing for dubbing: • Insert a recordable DVD. Press [HDD] first. 1 Press [TITLE]. 2 Use [ K / L / s / B ] to select a desired title to dub, then press [OK]. 3 Use [ K / L ] to select “Dubbing”, then press [OK].
55 EN 55 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español PRO TEC TING A DISC 1 Press [SETUP]. 2 Use [ K / L ] to select “Disc Edit”, then press [OK]. 3 Use [ K / L ] to select “Disc Protect OFF ON”, then press [OK].
56 EN 56 EN PLA Y ING THE DISCS ON O THER DVD PLA Y ERS Finalizing a Disc 1 Press [SETUP]. 2 Use [ K / L ] to select “Disc Edit”, then press [OK]. “Disc Edit” menu will appear. 3 Use [ K / L ] to select “Finalize”, then press [OK]. 4 Use [ K / L ] to select “ Yes”, then press [OK].
57 EN 57 EN Recording Basic Setup Connections Playback Editing Introduction Function Setup Others Español PLA YING THE DISCS ON O THER DVD PLA Y ERS 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. “General Setting” menu will appear.
58 EN 58 EN INFORMA TION ON PLA Y BA CK Before you play back DVD, read the following information. This unit is compatible to play back the following discs. To play back a DVD, make sure that it meets the requirements for region codes and color systems as described below.
59 EN 59 EN Recording Playback Basic Setup Connections Editing Introduction Function Setup Others Español You can select images or information on the menu screen by activating the PBC (playback control) function of the video CD. This unit conforms to ver.
60 EN 60 EN BASIC PLA Y BA CK Direct Playback If you are playing back the titles in HDD, press [HDD] first, then proceed to step 2. If you are playing back the titles in DVD, press [DVD] first. 1 Insert a disc (refer to page 24 on how to insert a disc).
61 EN 61 EN Recording Playback Basic Setup Connections Editing Introduction Function Setup Others Español BASIC PLA YBA CK If you are playing back the titles in HDD, press [HDD] first, then proceed to step 2. If you are playing back the titles in DVD, press [DVD] first.
62 EN 62 EN 4 Use [ K / L ] to select “Play” (for DVD), or select “Resume Playback” or “Play from Start” (for HDD), then press [OK]. e.g.) DVD 1 SP 2 3 NOV/21/07 11:00 AM CH12 SP NOV/21/07 0:20:44 NOV/22/07 11:35 AM CH13 EP NOV/22/07 0:10:33 EMPTY TITLE 1:37:52 SP Edit Overwrite Play Playback will start.
63 EN 63 EN Recording Playback Basic Setup Connections Editing Introduction Function Setup Others Español BASIC PLA YBA CK Playing Back an Audio CD and a CD-RW/-R with MP3 / JPEG Files Note • The audio source of MP3 files cannot be recorded as digital sound by an MD or DAT deck.
64 EN 64 EN BASIC PLA YBA CK Using the Title / Disc Menu DVD or video CD with PBC function may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc. Press [DVD] first.
65 EN 65 EN Recording Playback Basic Setup Connections Editing Introduction Function Setup Others Español SPECIAL PLA Y BA CK During playback, you can skip forward or backward by the amount of time you set in “Playback” menu. To set the time amount, refer to “ 8 Variable Skip / Replay” on page 99.
66 EN 66 EN SPECIAL PLA YBA CK Step by Step Playback 1) During playback, press [PAUSE F ]. Playback will be paused and sound will be muted. 2) Press [ G ] repeatedly. Playback will advance one frame (or step) at a time when you press [ G ] with the sound muted.
67 EN 67 EN Recording Playback Basic Setup Connections Editing Introduction Function Setup Others Español SPECIAL PLA YBA CK Zoom Note • When selecting a smaller factor than the current one, the zoom area will not be displayed. • To exit the zoom menu, press [DISPLAY] again at step 1.
68 EN 68 EN Repeat Playback Random Playback Available repeat function may vary depending the discs. 1) During playback press [DISPLAY], then proceed to step 2), or press [REPEAT] then proceed to step 3). 2) Use [ { / B ] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu.
69 EN 69 EN Recording Playback Basic Setup Connections Editing Introduction Function Setup Others Español Program Playback Note • To erase tracks you selected, press [CLEAR] at step 4. • You can make program settings up to 50 tracks. • To cancel program playback, press [STOP C ] twice during program playback.
70 EN 70 EN SEARCH Using [ H ] / [ G ] 1) During playback, press [ G ] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. • If there is no chapter in one title, the current title will be skipped.
71 EN 71 EN Recording Playback Basic Setup Connections Editing Introduction Function Setup Others Español 1) During playback, press [DISPLAY]. 2) Use [ { / B ] to select , then press [OK]. e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video e.g.) audio CD 1/ 5 CD 0:00:15 / 0:05:00 The number next to will be highlighted.
72 EN 72 EN DVD-video may have subtitles in 1 or more languages. Available subtitle languages can be found on the disc case. You can switch subtitle languages anytime during playback. 1) During playback, press [DISPLAY]. 2) Use [ { / B ] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu.
73 EN 73 EN Recording Playback Basic Setup Connections Editing Introduction Function Setup Others Español You can enjoy stereophonic virtual space through your existing 2 channel stereo system. 1 ) During playback, press [DISPLAY]. 2) Use [ { / B ] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu.
74 EN 74 EN INFORMA TION ON EDITING Guide to a Title List 1. Title name (editable) : Recording date, time, channel and the recording mode will be assigned automatically as the title name until you edit it.
75 EN 75 EN Playback Editing Recording Basic Setup Connections Introduction Function Setup Others Español Edit Menu Note • Once you have finalized a DVD+R/ DVD-R, you cannot edit or record anything on that disc. INFORMA TION ON EDITING How to Access the Edit Menu Press [HDD] first.
76 EN 76 EN EDITING Deleting a Title You can delete a title which you do not need anymore. Please be advised that the title once deleted cannot be brought back. If you are editing the titles on HDD, press [HDD] first. If you are editing the titles on DVD, press [DVD] first.
77 EN 77 EN Playback Editing Recording Basic Setup Connections Introduction Function Setup Others Español EDITING 4 Use [ K / L ] to select “Title Delete”, then press [OK].
78 EN 78 EN EDITING Deleting Selected Titles 3 Use [ K / L ] to select “Delete Multiple Titles”, then press [OK]. Resume Playbac k Play Fr om Star t Edit Title Delete Delete Multiple Titles Dubbing 4 Use [ K / L / { / B ] to select the title you want to delete, then press [OK].
79 EN 79 EN Playback Editing Recording Basic Setup Connections Introduction Function Setup Others Español EDITING Putting Names on Titles 4 Use [ K / L ] to select “ Yes”, then press [OK]. Edit - Edit Title Name No Ye s MY F AV ORITE 1 0:00:59 +VR The title name is now updated.
80 EN 80 EN EDITING Chapter Marks (Add) To add a chapter mark: 1 Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu. 2 Use [ K / L ] to select “Chapter Mark”, then press [OK]. Submenu will appear. 3 Play back the title up to the point where you want to set a new chapter mark.
81 EN 81 EN Playback Editing Recording Basic Setup Connections Introduction Function Setup Others Español EDITING Chapter Marks (Delete) To delete a chapter mark: 1 Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu.
82 EN 82 EN EDITING Chapter Marks (Delete All) To delete all chapter marks: 1 Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu. 2 Use [ K / L ] to select “Chapter Mark”, then press [OK]. Submenu will appear. 3 Use [ K / L ] to select “Delete All”, then press [OK].
83 EN 83 EN Playback Editing Recording Basic Setup Connections Introduction Function Setup Others Español EDITING Dividing a Title 1 Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu. 2 Play back the title up to the point where you want to divide the title.
84 EN 84 EN EDITING Deleting a Scene of a Title You can delete a specific part of a title. 1 Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu.
85 EN 85 EN Playback Editing Recording Basic Setup Connections Introduction Function Setup Others Español EDITING 5 With “Preview” highlighted, press [OK] to preview the result. Before and after 5 seconds of the deleted scene can be previewed every time you press [OK] .
86 EN 86 EN EDITING Protecting a Title 1 Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu. 2 Use [ K / L ] to select “Protect”, then press [OK]. Edit Scene Delete Edit Title Name Chapter Mark Title Dividing Protect JAN/ 1/07 12:00AM CH10 LP 1 : 25 : 47 1 3 With “OFF ON” selected, press [OK].
87 EN 87 EN Playback Editing Recording Basic Setup Connections Introduction Function Setup Others Español EDITING Hiding Chapters 1 Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu. 2 Use [ K / L ] to select “Hide Chapter”, then press [OK].
88 EN 88 EN EDITING Setting an Index Picture 1 Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu. 2 Play back the title to find the scene you want to use as an index picture. When it comes to the desired point, press [PAUSE F ].
89 EN 89 EN Playback Editing Recording Basic Setup Connections Introduction Function Setup Others Español Putting Name on Disc Press [STOP C ] if you are playing back a disc. 1 Press [SETUP]. 2 Use [ K / L ] to select “Disc Edit”, then press [OK].
90 EN 90 EN EDITING Erasing Disc Press [STOP C ] if you are playing back a disc. 1 Press [SETUP]. 2 Use [ K / L ] to select “Disc Edit”, then press [OK].
91 EN 91 EN Playback Editing Recording Basic Setup Connections Introduction Function Setup Others Español EDITING Making Edits Compatible Press [STOP C ] if you are playing back a disc. 1 Press [SETUP]. 2 Use [ K / L ] to select “Disc Edit”, then press [OK].
92 EN 92 EN EDITING Deleting All Titles in HDD Press [STOP C ] if you are playing back a disc. 1 Press [SETUP]. 2 Use [ K / L ] to select “HDD Menu”, then press [OK]. 3 Use [ K / L ] to select the desired type of deletion, then press [OK]. Select “Delete All Unprotected Titles” if you want to delete only the unprotected titles.
93 EN 93 EN Editing Function Setup Playback Recording Basic Setup Connections Introduction Others Español LIST OF SET TINGS The following table is the contents which you can set and the default setting. Refer to the following table for useful operation.
94 EN 94 EN LIST OF SET TINGS Setup Items (highlight is the default) Contents General Setting Display Pages 100-101 CC Style Pages 34-36 Font Style Style1 Style2 Style3 Style4 Style5 Style6 Style7 Style8 Set font style of the displayed caption. Edge Type None Raised Depressed Uniform L.
95 EN 95 EN Editing Function Setup Playback Recording Basic Setup Connections Introduction Others Español Note • Your change to each settings stays on even when the power is off. • An item which is not currently available is grayed in the settings.
96 EN 96 EN SETUPS Press [STOP C ] if you are playing back a disc. 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. “General Setting” menu will appear.
97 EN 97 EN Editing Function Setup Playback Recording Basic Setup Connections Introduction Others Español SETUPS 1 Parental Lock (Default: OFF) (DVD only) Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback.
98 EN 98 EN SETUPS 2 Disc Audio Choose the appropriate audio setting for your external device. It will only affect a disc playback. Use [ K / L ] to select a desired item, then press [OK] .
99 EN 99 EN Editing Function Setup Playback Recording Basic Setup Connections Introduction Others Español SETUPS 5 Subtitle Language (Default : OFF) (DVD only) Set the subtitle language. Use [ K / L ] to select a setting, then press [OK]. Subtitle Language OFF English French Spanish Other Your setting will be activated.
100 EN 100 EN SETUPS Press [STOP C ] if you are playing back a disc. 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. 2 Use [ K / L ] to select “Display”, then press [OK]. 3 Use [ K / L ] to select a desired item, then press [OK].
101 EN 101 EN Editing Function Setup Playback Recording Basic Setup Connections Introduction Others Español SETUPS 1 OSD Language (Default : English) Set the language for the on-screen display. Use [ K / L ] to select a setting, then press [OK]. OSD Language English Français Español Your setting will be activated.
102 EN 102 EN SETUPS Press [STOP C ] if you are playing back a disc. 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. 2 Use [ K / L ] to select “Video”, then press [OK]. 3 Use [ K / L ] to select a desired item, then press [OK].
103 EN 103 EN Editing Function Setup Playback Recording Basic Setup Connections Introduction Others Español 1 Progressive Scan (Default : OFF) This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does.
104 EN 104 EN Reset the setting to default. 1 Press [SETUP] and use [ K / L ] to select “General Setting”, then press [OK]. “General Setting” menu will appear. 2 Use [ K / L ] to select “Reset All”, then press [OK]. 3 Select “Yes” using [ K / L ] , then press [OK].
105 EN 105 EN Function Setup Others Editing Playback Recording Basic Setup Connections Introduction Español TROUBLESHOO TING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
106 EN 106 EN TROUBLESHOO TING RECORDING HDD/DVD Timer recording cannot be performed. • The internal clock of the unit may have been stopped due to a power failure that lasted for more than 30 seconds.
107 EN 107 EN Function Setup Others Editing Playback Recording Basic Setup Connections Introduction Español TROUBLESHOO TING PLAYBACK DVD Audio language or the subtitle language of the DVD cannot be changed. • Multilingual subtitles are not supported by the disc.
108 EN 108 EN Error message Cause Solution Disc Error — Please eject the disc. — Playback feature may not be available on this Disc. • Unplayable disc is inserted in the unit. • The disc is upside down. • Insert the standardized disc which bear the marks on page 58.
109 EN 109 EN Function Setup Others Editing Playback Recording Basic Setup Connections Introduction Español LANGU A GE C ODE Language Code Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amhari.
110 EN 110 EN Analog Audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. Aspect Ratio The width of a TV screen relative to its height.
111 EN 111 EN Function Setup Others Editing Playback Recording Basic Setup Connections Introduction Español SPECIFICA TIONS Note • The specifications and design of this product are subject to change without notice.
112 ES ESP AÑOL Logotipos Discos reproducibles Medio Archivos r eproducibles CD-DA MP3 CD-RW/-R JPEG CD-DA (CD de audio) CD de video CD-RW CD-R DVD-video DVD+RW DVD+R DVD-RW (Sólo discos en modo de video nalizados) DVD-R (Sólo discos en modo de video nalizados) es una marca registrada de DVD Format/L ogo Licensing Corporation.
Function Setup Others Editing Playback Recording Basic Setup Connections Introduction Español 113 ES 1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA. 2) Efectúe la conexión básica ilustrada más abajo. Conexión Básica 1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA.
114 ES Cuando usted encienda este aparato por primera vez necesita seguir estos pasos. 1 Presione [STANDBY-ON y y ]. Encienda el televisor. Seleccione la entrada a la cual está conectado el aparato. 2 Utilice [ K / L ] para seleccionar su idioma deseado, y luego presione [OK] para establecerlo.
Function Setup Others Editing Playback Recording Basic Setup Connections Introduction Español 115 ES Reproducción directa Preparación para el copiado (unidad de disco rígido a DVD): • Inserte un DVD grabable. Preparación para el copiado (DVD a unidad de disco rígido): • Inserte un disco a ser copiado.
LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Magnavox H2080MW8 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Magnavox H2080MW8 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Magnavox H2080MW8, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Magnavox H2080MW8 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Magnavox H2080MW8, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Magnavox H2080MW8.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Magnavox H2080MW8. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Magnavox H2080MW8 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
