Manuel d'utilisation / d'entretien du produit 500 du fabricant Harman
Aller à la page of 8
4X 1X 1X 4X 4X 8X 1X INCLUDED ITEMS 1X 3X 15 ft (4.5m) 2X 30 ft (9.0m) THANK YOU FOR CHOOSING THIS JBL ® PRODUCT The Cinema 500 is a complete six-piece home theater speaker system that includes four .
2 On/Standby LED: When the Power -On Mode Switch is in the “Auto” position, this LED indicates whether the subwoofer is in the On or Standby state: When the LED glows green, the subwoofer is turned on. • • When the LED glows red, the subwoofer is in the Standby mode.
3 www .j b l . co m Engli sh PLACING THE SPEAKERS FRONT LEFT AND RIGHT SPEAKERS CENTER SPEAKER SURROUND SPEAKERS AND SUBWOOFER Surround Right Speaker Surround Left Speaker 5 – 6 ft (1.
4 SPEAKER MOUNTING OPTIONS SHELF-MOUNTING Satellites: Center: 1. 3. 2. WALL-MOUNTING IMPORT ANT SAFETY NOTE: The customer is solely responsible for proper selection and installation of mounting har dware not included with the speakers. JBL disclaims any liability for the selection and installation of mounting hardwar e.
5 www .j b l . co m Engli sh SPEAKER OUTPUT Wire with Colored Band to “+” T erminal Wire with Colored Band to “+” T erminal Amplifier Speaker CONNECTING THE SPEAKERS CAUTION: Before making speaker connections, be sur e that your receiver or amplifier is turned off and pr eferably that its AC co rd is unplugged from the AC power outlet.
6 CONNECTING THE SUBWOOFER TO A RECEIVER OR PREAMP/PROCESSOR WITH A DEDICA TED SUBWOOFER OUTPUT Mono RCA Cable (included) Receiver or Amplifier SUBWOOFER LFE OUT SUB 140P Subwoofer Mono RCA Cable (inc.
7 www .j b l . co m Engli sh OPERA TING THE SUBWOOFER TURNING THE SUBWOOFER ON AND OFF Set the subwoofer’ s Power Switch to the “On” position. If the subwoofer’ s Power -On Mode Switch is set .
SPECIFICA TIONS CINEMA 500 SYSTEM Frequency r esponse: 32Hz – 20kHz (–6dB) CINEMA 500 CENTER SPEAKER Low-frequency transducer: T wo 3" (75mm) PolyPlas cones, video-shielded High-frequency transducer: 1" (25mm) titanium-laminate dome, video-shielded Recommended power handling: 100 watts Nominal impedance: 8 ohms Sensitivity (2.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Harman 500 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Harman 500 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Harman 500, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Harman 500 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Harman 500, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Harman 500.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Harman 500. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Harman 500 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.